Note: The SummaCut models have now been discontinued and replaced with the new Summa S One series.
CUTTING TYPE: Drag knife with TurboCut and Tangential Emulation Modes
TOOL COMPATIBILITY: Blade, Pen, Pounce Tool
CUTTING WIDTH: 48 inch (120 cm)
CUTTING SPEED: All SummaCut models cut at speeds up to 44 inches per second (113 cps) diagonal
AXIAL SPEED: Up to 2 G
ALIGNMENT TYPE:
• OPOS X
• Barcode job recognition
• Up to 2 x 64 marks on the X-line
• Y-Line compensation
MAXIMUM ACCELERATION: Up to 3 G diagonal
TRACKING PERFORMANCE:
Within ± 0.004 in. (± 0.1 mm) on plots up to 26 ft. long (8 m) on rolls up to 760 mm wide
Within ± 0.004 in. (± 0.1mm) on plots up to 13 ft. (4 m) long on rolls over 760 mm wide
CUTTING FORCE: 0-400 grams of down-force, in 5 gram increments
REPLOT MEMORY: 4 MB (buffer size: 16 MB)
DISPLAY LANGUAGES: English; French; German; Dutch; Italian; Spanish; Polish; Lithuanian
CONNECTIVITY: USB, Serial RS232
POWER REQUIREMENTS: 100-120 / 220-240 VAC, 50/60 Hz, 85 VA maximum
STANDARD ACCESSORIES: WinPlot or MacSign Cut Software, CutterControl Parameter Software, Quick Start Guide, Power Cable, USB Cable, Media Guide Flanges (set of 2), Standard 36˚ Blade Holder, 2 Standard 36˚ Blades, Cut-off Knife (Manual Slitter), 2 Cut-off Razor Blades.
